FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   + 3.2. Engine DOHC
   + 3.3. Engine V6
   + 3.4. Ignition and engine management systems
   - 3.5. Diesel engines
      3.5.1. A technical characteristics
      3.5.2. The repair which is not demanding removal of the engine
      3.5.3. Check and adjustment of backlashes of valves
      + 3.5.4. Fuel system
      + 3.5.5. A head of the block of cylinders
      3.5.6. Removal and engine installation
      + 3.5.7. Dismantling, repair and engine assemblage
      3.5.8. turbocharger
      + 3.5.9. Greasing system
      - 3.5.10. Cooling system
         3.5.10.1. Plums of a liquid from cooling system
         3.5.10.2. Filling of system and air removal
         3.5.10.3. The fan
         3.5.10.4. Removal and installation муфты the fan
         3.5.10.5. The thermostat
      3.5.11. Typical malfunctions of the engine
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



3.5.10.2. Filling of system and air removal
THE GENERAL DATA

The prevention

Removal of air from cooling system occurs automatically after engine start.


PERFORMANCE ORDER
1. To screw up a stopper plum of a cooling liquid on a radiator (it is specified by an arrow).
2. To check up fastening of elastic pipelines of system of cooling.
3. To fill system with a cooling liquid through a jellied aperture of a broad tank to level with a designation "MOVE" on a tank and to screw up a stopper.
4. To start the engine and to keep its number of turns within 1000–1500 rpm. Before opening of the thermostat of system of cooling.
5. To check up liquid level in a broad tank which should be between signs "MIN" and "MAX".