FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   + 5.4. System of giving of air
   + 5.5. Carburettor PIERBURG
   + 5.6. Carburettor WEBER 2V
   - 5.7. Carburettor WEBER 2V TLD
      5.7.1. Removal and carburettor installation
      5.7.2. Adjustment of turns of idling and quality of a mix
      5.7.3. The needle valve поплавковой chambers
      5.7.4. The vacuum device of a drive throttle заслонки the secondary chamber
      5.7.5. Replacement of a diaphragm of the valve экономайзера
      5.7.6. The automatic starting arrangement
      5.7.7. Adjustment of turns of fast idling
      5.7.8. Removal and installation демпфера throttle заслонки
      5.7.9. Adjustment
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



5.7.1. Removal and carburettor installation
THE GENERAL DATA

Carburettor Weber 2V TLD

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. To remove the case of the air filter.
3. To disconnect wires from the detonation gauge.
4. To disconnect wires from a heater of starting automatics.
5. To disconnect hoses of giving and fuel return.
6. To disconnect the lever of a side scene from throttle connection.
7. To disconnect a vacuum tube.
8. To remove a hose of system of cooling from скобы under the case of starting automatics.
9. To unscrew four screws "Тогх", to remove the carburettor and to close an aperture in an inlet collector pure rags. To remove a lining.
10. Carburettor installation is made in sequence, return to removal. After installation to adjust turns of idling and the maintenance WITH.