FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
- 8. A kardannyj shaft and the back bridge
   8.1. A technical characteristics
   + 8.2. A kardannyj shaft
   - 8.3. The back bridge
      8.3.1. Removal and installation of the back bridge
      8.3.2. Dismantling and assemblage of the back bridge
      8.3.3. Differential dismantling
      8.3.4. Differential assemblage
      8.3.5. Adjustment of bearings of gear wheels of the main transfer
      8.3.6. Adjustment of gear wheels of the main transfer
      8.3.7. Assemblage and adjustment of the main transfer
      8.3.8. Replacement of a sealing ring of a gear wheel of the main transfer
   + 8.4. Power shafts
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



8.3.8. Replacement of a sealing ring of a gear wheel of the main transfer
THE GENERAL DATA

Replacement of a sealing ring of a gear wheel of the main transfer is made without removal of the back bridge.

PERFORMANCE ORDER
1. To lift the car.
2. To disconnect карданный a shaft from a flange of a gear wheel of the main transfer and to suspend a shaft to a body.
3. By means of the adaptation 15.030 to unscrew nuts of fastening of a flange of a gear wheel of the main transfer.
4. To remove a flange from a gear wheel of the main transfer by means of a corresponding stripper.
5. To take a sealing ring of a gear wheel by means of the adaptation 15.072.
6. To establish a new sealing ring by means of the adaptation 15.047 And (not to wipe factory greasing from a sealing edge of a ring).
7. To establish a flange on a gear wheel of the main transfer, to put on a nut of fastening of a flange and to tighten it by means of the adaptation 15.030.
8. To attach карданный a shaft to a flange of a gear wheel of the main transfer.