FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
- 8. A kardannyj shaft and the back bridge
   8.1. A technical characteristics
   + 8.2. A kardannyj shaft
   - 8.3. The back bridge
      8.3.1. Removal and installation of the back bridge
      8.3.2. Dismantling and assemblage of the back bridge
      8.3.3. Differential dismantling
      8.3.4. Differential assemblage
      8.3.5. Adjustment of bearings of gear wheels of the main transfer
      8.3.6. Adjustment of gear wheels of the main transfer
      8.3.7. Assemblage and adjustment of the main transfer
      8.3.8. Replacement of a sealing ring of a gear wheel of the main transfer
   + 8.4. Power shafts
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



8.3.2. Dismantling and assemblage of the back bridge
THE GENERAL DATA

Leading gear wheel of the main transfer together with conic bearings and the deformed remote plug

1 – the external conic bearing,

2 – the deformed remote plug

PERFORMANCE ORDER
1. To arrange the back bridge on the corresponding holder (the adaptation 15.070).
2. To unscrew bolts Torx of fastening of a cover of the back bridge, to uncover and merge from картера oil.
3. To take target shaft from the back bridge.
4. To remove plates adjustments of a backlash of bearings of differential fixing a flange.
5. To designate their position.
6. To remove flanges of adjustment of a backlash of bearings (fig. of the Detail of the back bridge see), and also a differential box (a key 15.071).
7. To unscrew a nut of fastening of a flange to a gear wheel of the main transfer (the adaptation 15.040).
8. By means of a corresponding universal stripper to remove a flange from a gear wheel.
9. To unscrew a nut of fastening of bearings of a gear wheel of the main transfer (the adaptation 15.073 and накидной the bent key of 36 mm).
10. To take a gear wheel of the main transfer, the conic bearing and the remote plug.