FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   - 13.4. External elements of a body
      13.4.1. Removal and installation of the cylinder of the lock of a mouth of a gulf of fuel
      13.4.2. Removal and installation of a cover of the hatch
      13.4.3. Removal and installation of a windscreen and motionless glasses
      13.4.4. Removal and installation of decorative overlays of a windscreen
      13.4.5. Removal and installation of decorative overlays of glass of a back door
      13.4.6. Removal and installation of emblems
      13.4.7. Adjustment of height of installation of a forward bumper
      13.4.8. Removal and installation of bumpers
      13.4.9. Removal and installation of overlays of a bumper
      13.4.10. Removal and installation of a forward spoiler
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment



13.4.7. Adjustment of height of installation of a forward bumper
THE GENERAL DATA

Adjustment of height of installation of a forward bumper

1 – a tightening nut,

2 – a blocking bolt,

3 – the carving plug,

4 – a bumper,

5 – an adjusting bolt

The height of installation of a forward bumper is made by means of two adjusting bolts located in forward support.

PERFORMANCE ORDER
1. A key of "Togh" to weaken lock bolts.
2. To expose a bumper on the demanded height, rotating adjusting bolts of 24 mm a replaceable head. The bumper height is adjusted truly when the backlash between its top and a bottom edge of lateral sections of a lattice of a radiator is equal 7 mm.
3. After installation of height of a forward bumper to tighten lock bolts.