FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   - 13.3. Doors
      13.3.1. Removal and installation of doors
      13.3.2. Adjustment of position of a door
      13.3.3. Removal and installation of the panel of an internal upholstery of doors
      13.3.4. Removal and installation of external handles of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a sealant of a door
      13.3.8. Removal and installation of glasses of a door
      13.3.9. Removal and mechanism installation window lifterа
      13.3.10. Removal and installation of decorative lateral overlays of doors
      13.3.11. Removal and installation of decorative overlays of a frame of glasses of a door
      13.3.12. Removal and installation of external rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a luggage carrier
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation газонаполненного an emphasis of a door of a luggage carrier
      13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)
      13.3.18. Removal and installation of the lock of a cover of a luggage carrier (model Salon)
   + 13.4. External elements of a body
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment



13.3.3. Removal and installation of the panel of an internal upholstery of doors

FORWARD DOOR

PERFORMANCE ORDER
1. To open a door and to unscrew 5 screws (on a back door of 7 screws) fastenings of forward and back edge of the panel of an internal upholstery of a door (arrows specify screws of fastening of a back part of an upholstery of a door).
2. To remove two заглушки and to unscrew two screws of fastening of a pocket of a door. To remove a pocket.
3. On cars with an electric drive of glasses and mirrors to wring out and disconnect sockets of drives. A socket of the switch of the electric drive has flown down from outside the driver has colour marks; the blue tip – distant glass. On cars with manual window lifterом to remove the handle of lifting of glass which fastens one screw.
4. To remove decorative заглушку (it is specified by an arrow) for access to the screw of fastening of the handle window lifterа.
5. To unscrew screws (are specified by arrows) armrest fastenings. Access to one of them is possible through an aperture after switch removal window lifterа.
6. To unscrew the screw (it is specified by an arrow) fastenings of a decorative overlay of the internal handle of a door.
7. To unscrew the screw (it is specified by an arrow) fastenings and to remove the decorative triangular overlay closing the screw of fastening of a mirror and to unscrew a mirror.
8. To wring out the panel of an upholstery from a door in the top part for clearing of clips, then to raise it upwards for clearing of the bottom fixing support. For this purpose it is necessary to shake the panel of an internal upholstery of doors slightly.
9. For access to internal elements of a door it is necessary to remove пенорезиновое a covering (1). It fastens клеющим a layer along the edges, some elements of a door can be attached together with it. In these parts the covering is necessary for cutting off a knife, and at installation to glue it (2 – a kind of a door without a covering).
10. Installation is made in sequence, return to removal.

BACK DOOR

Operations on removal of the panel of an internal upholstery of back doors same, as for forward doors (see above). Difference consists that the block of the internal handle fastens two screws access to one of which is possible after ashtray removal.