FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
- 9. A steering
   9.1. A technical characteristics
   + 9.2. Service and repair
   - 9.3. A steering with the hydraulic booster
      9.3.1. A technical characteristics
      - 9.3.2. Service and repair
         9.3.2.1. Removal and installation of steering transfer
         9.3.2.2. Dismantling and assemblage of steering transfer CAM GEAR
         9.3.2.3. Dismantling and assemblage of steering transfer ZF
         9.3.2.4. Removal and installation of a steering column
         9.3.2.5. Dismantling and assemblage of a steering column
         9.3.2.6. Removal and installation of the pump of the amplifier of a steering
         9.3.2.7. Dismantling and assemblage of the pump of the hydraulic booster
         9.3.2.8. Replacement and tension adjustment drive a belt
         9.3.2.9. Replacement of protective covers of the steering mechanism
         9.3.2.10. Removal of air from system of a steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



9.3.2. Service and repair

9.3.2.1. Removal and installation of steering transfer
THE GENERAL DATA

Steering with the hydraulic booster

And – marks ZF,
In – marks Cam Gear,
1 – приводная a gear wheel,
2 – the case приводной gear wheels,
3 – the case gear рейки,
4 – gear рейка,
5 – the piston and a connector,
6 – steering draughts,
7 – pipelines of a high pressure,
8 – the case of the hydraulic pump,
9 – the hydraulic pump,
10 – an axis of a rotor of the pump,
11 – a rotor of the pump with blades,
12 – муфта a high pressure

Bolt of fastening of steering transfer


The bolt is specified by an arrow.

Removal

PERFORMANCE ORDER
1. To establish a steering wheel in position for movement directly.
2. To unscrew a bolt of a tightening holder of a flange of the elastic hinge and to disconnect a shaft of a steering wheel from приводной gear wheels of steering transfer.
3. To lift the car and to remove forward wheels.
4. To take шплинты and to unscrew корончатые nuts of spherical hinges of steering draughts.
5. To disconnect steering draughts from rotary fists of wheels by means of a stripper 13.006.
6. To unscrew pipelines of a high pressure from the case of transfer and to merge oil from hydraulic system.
7. To unscrew the pipeline of low pressure from the transfer case.
8. To unscrew two bolts of fastening of the case of steering transfer to a cross-beam of a body and to take steering transfer.

Installation

PERFORMANCE ORDER
1. To establish the case of steering transfer on a corresponding place and to screw up two bolts of fastening of the case of steering transfer to a body cross-beam.
2. To connect hydraulic pipelines, establishing new linings on connections.
3. To connect steering draughts to rotary fists of wheels.
4. To tighten all carving connections by the corresponding moments.
5. To establish forward wheels and to lower the car.
6. To fill in oil and to remove air from steering system.
7. To check up and in case of need to adjust disorder / a convergence of wheels.