FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   + 13.4. External elements of a body
   + 13.5. Salon elements
   - 13.6. Heating and ventilation system
      13.6.1. Removal and installation of the block of management by a heater
      13.6.2. Removal and installation of cables of management of a heater
      13.6.3. Removal and heater installation
      13.6.4. Dismantling and heater assemblage
      13.6.5. Removal and installation of air lines of a heater
   + 13.7. The conditioner
+ 14. An electric equipment



13.6.1. Removal and installation of the block of management by a heater

THE CARS MADE TO 04.1992 YEARS

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


The forward block
2. To remove a combination of devices from the panel of devices.
3. To remove the top part from the panel of devices.
4. To mark position of cables. To release a clip (it is specified by an arrow) cable covers, to remove clips and a cable of the lever of a regulator of temperature.
5. Similarly to remove a cable of the distributor of air.
6. On cars with the conditioner disconnect hoses from the vacuum switch.
7. To unscrew four screws of fastening of the block of management of a heater.
8. To establish and fix screws a control panel.
9. To connect cables according to the put marks and to fix clips to the heater panel, to establish adjusting clips and to fix covers of cables.
10. To establish a combination of devices on the panel of devices.
The back block
11. To remove the central console.
12. To disconnect cables of management and to remove the management block.
13. Installation is made in sequence, return to removal.

THE CARS MADE ABOUT 04.1992 YEARS

The block of management of a heater

1 – clips of cables of management,

2 – a cover,

3 – the switch of the fan,

4 – the basic payment

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


2. To unscrew two screws and to remove an overlay from the panel of devices.
3. To remove rotary handles of the block of management of a heater, simply having pulled them on itself.
4. To unscrew 4 screws of fastening of an overlay of the block of management, to delay a few overlay and to disconnect sockets. Completely to remove an overlay of the block of management.
5. To unscrew two screws (are specified by arrows) fastenings of the block of management. To take the block of management of a heater and to disconnect a multicontact socket.
6. To remove from the block of management the fan switch.
7. A screw-driver to unbend keeping uvulas and to uncover the basic payment.
8. To make an incision fixing clips of cables. To release from a directing gear tape and to pull out cables.
9. To establish cables in the basic payment and to connect to a gear directing tape. To fix cables new clips.
10. To establish on the basic payment a cover and to compress keeping uvulas.
11. To establish in the block of management of a heater the fan switch.
12. To connect to the block of management of a heater a multicontact socket.
13. To establish and fix the block of management of a heater screws.
14. To connect to an overlay of the block of management of a heater a multicontact socket and to screw an overlay screws.
15. To establish on the block of management of a heater rotary handles.
16. To establish an overlay on the panel of devices and to fix its screws.
17. To connect a weight wire to the accumulator.