FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
- 11. Brake system
   11.1. A technical characteristics
   - 11.2. Forward brakes
      11.2.1. Replacement brake колодок
      11.2.2. Support replacement
      11.2.3. Replacement of a brake disk
   + 11.3. Back brakes
   11.4. Adjustment of a manual brake
   11.5. Removal of air from brake system
   + 11.6. Antiblocking system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment



11.2.3. Replacement of a brake disk
THE GENERAL DATA

The prevention

Disks of both forward brakes should have an identical thickness and a surface condition, only then both wheels will be braked simultaneously. Therefore it is recommended to replace simultaneously both disks.


Removal

PERFORMANCE ORDER
1. To remove brake Pads (subsection 11.2.1 see).
2. To suspend a support to a body by means of a wire to protect a brake hose from damage.
3. To unscrew the holder of a support from a rotary fist of a wheel.
4. To unscrew the screw of fastening of a brake disk from a nave of a wheel and to remove a brake disk.

Installation

PERFORMANCE ORDER
1. To establish a brake disk and to screw up the screw of its fastening to a wheel nave (the arrow specifies a spring adjusting ring of fastening of a brake disk).
2. To screw the holder of a support on a rotary fist of a wheel.
3. To establish brake Pads and a support (subsection 11.2.1 see).
4. To establish wheels, to lower the car and to tighten nuts of fastening of wheels.
5. Some times strongly to press a brake pedal to result brake Pads in contact to a brake disk.