FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
- 9. A steering
   9.1. A technical characteristics
   - 9.2. Service and repair
      9.2.1. Removal and installation of steering transfer
      9.2.2. Dismantling and assemblage of steering transfer
      9.2.3. Removal and steering wheel installation
      9.2.4. A steering wheel centering
      9.2.5. Removal and installation of the lock of blocking of a steering column
      9.2.6. Removal and installation of a steering column
      9.2.7. Dismantling and assemblage of a steering shaft
   + 9.3. A steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


9.2.6. Removal and installation of a steering column
THE GENERAL DATA

Steering column


Bolts of fastening of an arm of adjustment of a steering wheel on height


Fastening bolts are specified by arrows.

Removal

PERFORMANCE ORDER
1. To establish car wheels in position for advance.
2. To remove top and bottom a casing of a steering column. For removal of the top part of a casing to establish in the bottom position the device of adjustment of a steering column on height.
3. To unscrew a coupling bolt of a connecting flange of a steering shaft.
4. To remove the lever of opening of the lock of a cowl and to disconnect a cable of the lock of a cowl from a steering column.
5. To disconnect sockets of electric wires from the universal switch, the switch of ignition and a sound signal.
6. To remove the central nozzle of system of ventilation.
7. To remove the left bottom overlay of the panel of devices.
8. To remove the block of auxiliary control bulbs.
9. To unscrew three bolts of fastening of an arm of the device of adjustment of a steering column on height.
10. To take knot of a steering column.

Installation

PERFORMANCE ORDER
1. To check up correctness of position of the wheels established for advance.
2. To establish on a corresponding place a steering column, without tightening a nut of its fastening.
3. To establish the lever of opening of the lock of a cowl.
4. To connect sockets of electric wires.
5. To establish top and bottom a casing of a steering column.
6. To connect a steering shaft with приводной a gear wheel.
7. To check up symmetry of position of a steering wheel at installation of wheels for advance.