FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   - 5.4. System of giving of air
      5.4.1. Removal and installation of the air filter
      5.4.2. A temperature regulator
      5.4.3. The fuel pump
      5.4.4. Replacement of the fuel filter by engines with system of injection of fuel
      5.4.5. Removal and installation of a fuel tank
      5.4.6. Removal and installation of the gauge of measurement of level of fuel
      5.4.7. Removal and installation of the inertial switch of giving of fuel
      5.4.8. Removal and installation of a pedal of an accelerator
      5.4.9. Removal and installation of a cable of an accelerator
      5.4.10. A steam separator
   + 5.5. Carburettor PIERBURG
   + 5.6. Carburettor WEBER 2V
   + 5.7. Carburettor WEBER 2V TLD
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


5.4.5. Removal and installation of a fuel tank
THE GENERAL DATA

To remove a fuel tank it is possible after full development of fuel or in the presence of the special pumping out pump.

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. At presence in a fuel tank to pump out its special pump.
3. To unscrew two screws from each party of a mouth of a fuel tank.
4. To lift a back part of the car and to fix on supports.
5. To remove a guard from an internal arch of the right back wheel and the bottom screen of the back bumper, fastening six screws.
6. To remove from a fuel tank submitting and returnable топливопроводы.
7. Holding a fuel tank, to unscrew two bolts from the back holder of fastening of a tank.
8. To lower a fuel tank with keeping laths, to unhook the forward ends of laths from locks.
9. To disconnect a wire from the gauge of level of fuel.
10. To disconnect from a fuel tank a ventilation hose.
11. To remove a fuel tank with the bulk mouth attached to it.
12. Installation is made in sequence, return to removal.